Product description >
Shado 3x2m half-cassette awning - aluminium with polyester fabric
Wall fixings supplied
280g/m2 polyester fabric
Resilient and ready to mount
Our Shado awning is high quality and will last you a long time. It can be mounted on solid concrete or brick walls, as well as to a hardwood support using the supplied fixing kit (wood screws, screws and dowels). The half-cassette casing protects the rolled up canopy from insects, rain, dust and sunlight.
The 280g/m2 thick polyester canopy ensures excellent shade. The fabric has been coated with polyurethane to provide UV, weather and tear resistance. The most heavily-used areas have double seams for extra strength.
Easy to open, close and store
The canopy wraps around a sturdy, anodised aluminium tube. Tension is maintained between the aluminium arm and double tensioning cables, to maintain a permanently taut fabric, making the awning easy to open. The canopy is easy to unfold and store. You can use the supplied crank to operate the awning and open or close it to the degree of your choosing.
Screw kit to angle the awning
The valance has a straight cut, which gives it a modern look. The Shado awning can be adjusted to suit your home, with an adjustment kit to decide the slope angle you'd like. With quality materials including aluminium (roller and arms) and cast aluminium (supports, claws and fixings), this is a strong, long-lasting awning for your garden.
Aluminium half-cassette structure
Roller (fabric roller): Ø70x1.2mm - anodised aluminium
Torsion bar: 40 x 40 x 1.2mm - reinforced steel
Load bar: 53 x 43mm - aluminium
Arms: 2 aluminium arms, 58 x 29mm and 48 x 21mm, ultra-resistant tensioning system - made up of internal springs and double-coated steel cables
Canopy: 280g/m2 polyurethane-coated polyester, UV protection of UPF50+ and water-repellent
Valance: 22cm drop, removable, the same material as the canopy
Doubled seams in the heavily used areas
Min/Max tilt: 5°/40° (adjusted with the screws)
Wall bracket: 2, made of cast aluminium
Hardwood mounting: 4 x M10x80 screws
Solid wall/concrete mounting: 4 screws and M14x80mm nuts
Eyelet: Crank on the left hand side of the blind (viewed from the front)
This product is designed to provide shade from the sun and protect from gentle rain. It must not be left open permanently, as this would expose it to excessive wind load which could damage the product.
The intended use is wall installation - brick, concrete, hardwood wall or partition. If you wish to mount the blind to a cavity wall, you will need to use a suitable method (chemical, lag bolt).
The fixing kit is designed for wall installation only - do not attempt to mount the awning on the ceiling.