Alombra 4 x 2.5m awning - aluminium and polyester canopy

Product features
 
Excellent value for money
Large 4m shade
280g/m2 polyester canopy

Strong and easy to assemble

Our Alombra awning is very practical. It can be mounted on solid concrete or brick walls, as well as to a hardwood support using the supplied fixing kit (wood screws, screws and dowels). This model is excellent value for money as it is high quality and shares several features with higher-priced products.

The 280g/m2 dense polyester canopy provides perfect shade from the sun. The fabric has been coated with polyurethane to provide UV, weather and tear resistance. The most heavily-used areas have double seams for extra strength.

Crank handle for easy opening and closing

La toile est enroulée autour d’un tube en aluminium anodisé, robuste. La tension de cette toile se fait à l’aide d’un bras en aluminium à haute résistance, pour une toile tendue en permanence et une ouverture facilitée. Le déploiement et le rangement de la toile s’effectuent simplement. Pour régler la projection souhaitée ou replier le store, il suffit d’insérer la manivelle fournie dans l’œillet prévu et de l’actionner.

The canopy wraps around a sturdy, anodised aluminium tube. Tension is maintained by the high-resistance aluminium arm, to maintain a permanently taut fabric, making the awning easy to open. The canopy is easy to unfold and store. You can use the supplied crank to operate the awning and open or close it to the degree of your choosing.

Modern style to match your home 

The valance has a straight cut, which gives it a modern look. The valance is also removable. The Alombra awning can be adjusted to suit your home, with an adjustment kit to decide the slope angle you'd like. With quality materials including aluminium (roller and arms) and cast aluminium (supports, claws and fixings), this is a strong, long-lasting awning for your garden. 

Technical details

One-piece structure and horizontal (mantling support) bar - aluminium
Roller (without fabric): Ø60x1.2mm, in anodised aluminium
Torsion bar: 35 x 35 x 1mm, reinforced steel
Arms: 2 aluminium arms, 58x29mm and 48x21mm, ultra-resistant tensioning system - made up of internal springs and double-coated steel cables
Canopy: 280g/m2 polyurethane-coated polyester, UV protection UPF50+ and water repellent
Valance: 22cm, removable, the same material as the canopy
Doubled seams in the heavily used areas
Min/Max tilt: 5°/40° (adjusted with the screws)
Wall bracket: 3, made of cast aluminium
Hardwood mounting: 6 x M10x80mm screws
Solid wall/concrete mounting: 6 screws and M14x80mm nuts 
Eyelet: Crank on the left-hand side of the blind (viewed from the front)

Additional information

This product is designed to provide shade from the sun and protect from gentle rain. It must not be left open permanently, as this would expose it to excessive wind load which could damage the product. 

The intended use is wall installation - brick, concrete, hardwood wall or partition. If you wish to mount the blind to a cavity wall, you will need to use a suitable method (chemical, lag bolt).

The fixing kit is designed for wall installation only - do not attempt to mount the awning on the ceiling.